Additional Information
Wouldn’t it be cool if you could upgrade the cooling and performance of your bitaxe, simply by placing it in a better stand? Now you can.
Upgrade any Bitaxe simply by placing it in the CoolAxe Overclocking Stand.
Specifically designed to fit all Bitaxe models, including the powerful Bitaxe Gamma, this stand not only enhances your mining setup aesthetically but significantly boosts performance through an innovative cooling system. Negative pressure sucks the hot air from the ASIC through the stand itself, created by a fan in the back of the stand which vents the air out. This approach allows your Bitaxe to maintain a significantly lower operating temperature, even with stock heatsink and fan. Compatible with two rear fan sizes, 60x60x15 mm and 40x40x20 mm, available with or without fan, pick the 60mm fan for the best performance. Full access to the back of the Bitaxe makes the CoolAxe the perfect base for modding. Test results show the Bitaxe Gamma in the CoolAxe Stand (60mm fan) maintains a median temperature around ~46.5°C with stock cooling and settings and a median temperature of 59°C when running highly overclocked. This can be further reduced with aftermarket heatsinks and fans, allowing you to push the Bitaxe to its limits. In our testing, a heatsink on the back of the voltage regulator proved to be a effective addition to this setup and is highly recommended. The CoolAxe is printed from PETG to avoid material degradation and ensure long term stability when overclocking, so the color options are limited. 4Pin Y Splitter Cable included.
-
Cooler environment ensures improved ASIC operation
- Innovative cooling concept using negative pressure
- Available with two fan sizes
-
Push the limits of any Bitaxe with this inexpensive upgrade
-
Compatible with Bitaxe Ultra, Supra & Gamma from any manufacturer
-
Fan Options: Compatible with two fan sizes at the rear – 60x60x15 mm and 40x40x20 mm. Opt for the 60mm fan for optimal performance
-
Modding Friendly: The design allows full access to the back of the Bitaxe, making it perfect for modifications like adding a rear-mounted heatsink for even better thermal management
-
A Bitaxe Gamma fitted into the CoolAxe Stand can maintain a median temperature of approximately 46.1°C with its stock cooling setup. With aftermarket modifications, temperatures can be reduced further, pushing your mining efficiency to new heights
-
Crafted from PETG, a material chosen for its higher rigidity, ensuring the stand remains stable under the heat generated during overclocking. Due to material properties, color options are selective but guaranteed to withstand the rigors of mining environments
- PETG’s thermal stability makes it an excellent choice for environments where equipment might be exposed to elevated temperatures, ensuring the CoolAxe Overclocking Stand remains a sturdy and reliable component in your mining operation
https://x.com/Printer_Gobrrr/status/1858098251959783673
Bitaxe not included, add a Bitaxe to your cart here
Overclock at your own risk and happy hashing!
